About:

Read More... Read Less...

Replacing your old worn out or damaged standing rigging is a crucial requirement to insure your safety and the safety of others. For over 40 years we have specialized in manufacturing standing rigging for all of the major sailboat manufacturers nationwide. In fact, we provided nearly all the OEM standing rigging packages to sailboat manufacturers including Hunter, Island Packet, Beneteau, Compac, Tartan, Irwin, Endeavour, Watkins, Precision and Caliber and many others.

We have an extensive library of all the standing rigging specifications for all these sailboat manufactures. Therefore, if you are in need of an entire standing rigging replacement or just need a stay or shroud replaced just give us a call or send us an email and we can provide you with a cost right away.

For the DIY rigger, we offer a full complement of 1×19 cable, swage fittings, swageless fittings and tools that will allow you build you rigging if you have the proper swaging equipment. We also offer open ended standing rigging packages. These packages include entire sets of standing rigging or just the stay or shroud that you need with a factory swage fitting installed for the upper end and a swageless Sta-Lok fitting supplied loose for you to install for the lower end.


Click here to see more standing rigging we have available for order over the phone.


Don't see your boat? Call us at 1-888-535-7326

We are able to manufacture most US standing rigging sets.

Build Your Own:



Select Your Model:



The listed prices for standing rigging by model reflect the rigging shown in our diagrams. If your standing rigging does not match our diagram, or has been modified, then the quoted price is not applicable to your boat. Please call us at 1.888.535.7326 if you need a quote for standing rigging not listed on our site.
Sort by:
Show:
J70Standing Rigging

Upper - J-70 (Factory Built)

Upper for a J-70: The original factory spec for the J-70 calls for the wire diameter to be 3/16" with a marine eye at one end of the cable and...
$104.00
J70Standing Rigging

Lower - J-70 (Factory Built)

Lower for a J-70: The original factory spec for the J-70 calls for the wire diameter to be 3/16" with a marine eye at one end of the cable and...
$91.00
J70Standing Rigging

Forestay - J-70 (Factory Built)

Forestay for a J-70: The original factory spec for the J-70 calls for the wire diameter to be 3/16" with a marine eye at one end of the cable and...
$421.00
SonarStanding Rigging

Backstay - Sonar (Factory Built)

for a Sonar: The original factory spec for the Sonar calls for the wire diameter to be 1/8" with a marine eye at one end of the cable and a...
$31.55
SonarStanding Rigging

Headstay - Sonar (Factory Built)

Headstay for a Sonar: The original factory spec for the Sonar calls for the wire diameter to be 5/32" with a T-Ball at one end of the cable and a...
$78.00
SonarStanding Rigging

Lower - Sonar (Factory Built)

Lower for a Sonar: The original factory spec for the Sonar calls for the wire diameter to be 5/32" with a T-Ball at one end of the cable and an...
$32.05
SonarStanding Rigging

Upper - Sonar (Factory Built)

Upper for a Sonar: The original factory spec for the Sonar calls for the wire diameter to be 5/32" with a T-Ball at one end of the cable and an...
$40.00
C420Standing Rigging

Shroud - Club 420 (Factory Built)

Shroud for a Club 420: The original factory spec for the club 420 calls for the wire diameter to be 3/32" with a marine eye at one end of the...
$68.50
C420Standing Rigging

Forestay - Club 420 (Factory Built)

Forestay for a Club 420: The original factory spec for the Club 420 calls for the wire diameter to be 1/8" with a marine eye at one end of the...
$42.99
J24Standing Rigging

Backstay Upper - J24 (Factory Built)

Backstay for a J24: The original factory spec for the J 24 calls for the wire diameter to be 5/32" with a marine eye at one end of the cable...
$87.79 $49.00
Hunter 35.5Standing Rigging

Intermediate - Hunter 35.5 (Factory Built)

Intermediate for a Hunter 35.5: The original factory spec for the hunter 35.5 calls for the wire diameter to be 7/32" with a swaged stemball w/ cup at one end...
$159.20
Hunter 35.5Standing Rigging

Bridle - Hunter 35.5 (Factory Built)

Bridles for a Hunter 35.5: The original factory spec for the hunter 35.5 calls for the wire diameter to be 3/16" with a swaged marine eye at one end and...
$114.05
Hunter 35.5Standing Rigging

Backstay Upper - Hunter 35.5 (Factory Built)

Backstay Upper for a Hunter 35.5: The original factory spec for the hunter 35.5 calls for the wire diameter to be 7/32" with a swaged stemball w/ cup at one...
$93.00
Hunter 35.5Standing Rigging

Lower - Hunter 35.5 (Factory Built)

Lower for a Hunter 35.5: The original factory spec for the hunter 35.5 calls for the wire diameter to be 9/32" with a swaged stemball w/ cups at one end...
$213.65
Hunter 35.5Standing Rigging

Upper - Hunter 35.5 (Factory Built)

Upper for a Hunter 35.5: The original factory spec for the hunter 35.5 calls for the wire diameter to be 9/32" with a swaged stemball w/ cup at one end...
$250.70
Show: