Build Your Own Custom Anchor Rode

More Views

Build Your Own Custom Anchor Rode
$0.00

Availability: In stock

    Characters left: 4

    * Required Fields

    Description

    Details

    G4 High Test Chain

    Size Working Load Limit Wt per 100ft
    1/4 2600 lbs 74.89
    5/16 3900 lbs 109.8
    3/8 5400 lbs 149.5

    Suggested Anchor Rode size chart

    Boat Length Anchor Rode Size
    Up To 35 ft 1/2" rope - 1/4" or 5/16" chain
    35 -45 ft 5/8" rope - 5/16" or 3/8" chain
    * It is recommended that you check your windlass manual for exact specifications on chain size.
    Anchor Rodes Shackle
    Anchor Rodes Swivel
    Anchor Rodes Shackle Diagram
    Anchor Rodes Swivel Diagram

    Anchor Shackle

    Size Working Load A B C
    1/4 500lbs 3/4 1/2 5/16
    5/16 750 lbs 3/4 1/2 3/8
    3/8 1000lbs 1 5/8 7/16

    Anchor Rodes Swivel Specs

    Chain Size Working Load A B C D E F G
    1/4" - 5/16" 4500 lbs 3 9/16 3/8 13/16 1 1/16 11/16 3/8 5/16
    5/16" - 3/8" 7000 lbs 4 11/16 1/2 1 1/16 1 1/2 13/16 7/16 15/32
    When selecting a shackle it is advised that you go one size bigger than your chain. Examples: 1/4" Chain, 5/16 Shackle - 5/16 chain, 3/8" shackle - 3/8" chain, 7/16" Shackle.

    3 STRAND NYLON

    Diameter Tensile Strength (average) Weight / 100ft (average)
    1/2 6400 6.5
    5/8 10400 10.5

    8 PLAIT NYLON

    Diameter Tensile Strength (average) Weight / 100ft (average)
    1/2 6400 6.8
    5/8 11000 11.1

    About our rodes

    Seco South is an Original Equipment Manufacturer (OEM) that has serviced the marine industry nationwide for over 40 years. Anchor rodes are a vital part of boating safety and we take this very seriously by choosing to use premium quality products. Our 8 Plait anchor rodes are manufactured to work with all major windlass brands including LEWMAR & MAXWELL. We always suggest that you refer to you windlass manual to determine the proper size of the rope/chain to use with your windlass. The 8 Plait nylon we use is a premium grade-medium lay windlass grade and is manufactured in the USA. We hand splice & taper the nylon to the chain to insure a smooth transition of the splice around the Windlass Gypsy. The chain we use is a premium quality galvanized G4 High Test and is manufactured to ACCO specifications for windlass use. . We also include a galvanized screw pin shackle for easy attachment to the anchor. Our anchor rodes are used by nearly all of the nations leading boat manufacturers Rope: 150ft of 1/2" dia. 8 Plait Nylon Nylon Chain: 15ft of 1/4" G4 High Test Chain Shackle: 5/16" Galvanized